iBlok Waterstop Base coat – Exterior
iBlok WaterStop Roof Coat Exteriors is a Fibre-Reinforced Waterproof Coating. Designed with special elastomeric and tough acrylic polymers, it has fibres for extra reinforcement. iBlok WaterStop Roof Coat Exteriors is an excellent waterproofing envelope for your terrace and parapet walls that has been tested to protect against moisture and dampness.
Features:
1. Anti carbonation
2. Endures 7 Years
3. Excellent crack-bridging & flexibility bridges
4. Fibre Reinforced
5. High mechanical strength
6. Resist positive hydrostatic pressure
7. Resist positive hydrostatic pressure
8. Strong abrasion resistance damage
Features of iBlok Waterstop Base coat – Exterior
Endures 3 years
Excellent adhesion
High water resistance
Low VOC
Resists positive hydrostatic – Up to 4 bars on vertical surfaces
Certifications
- As per DIN 1048, It passes 4 bars resistance to Positive Hydrostatic Pressure on Vertical Surfaces and 6 bars resistance to Positive Hydrostatic pressure on Horizontal Surfaces
- As Per ASTM 3075, the film passes Elongation test of 300%
- Compliant to VOC requirement for paints for LEED rated buildings
APPLICATION
- Horizontal surfaces: Apply self-priming coat (diluted with water 25% v/v) using brush/roller at forced coverage of 75 sqft/l. Apply 2 coats without dilution using brush/roller at forced coverage of 37 sqft/l for each coat to achieve overall coverage of 15 sqft/l Ensure that iBlok WaterStop Prime Coat Exteriors is applied over the entire roof and parapet walls to form a continuous blanket
- Vertical surfaces: Apply self-priming coat (diluted with water 25% v/v) using brush/roller at forced coverage of 90 sqft/l. Apply one additional coat without dilution using brush/roller at forced coverage of 90 sqft/l to achieve overall coverage of 45 sqft/l
- Allow drying of 4-6 hours between recoats
- Apply appropriate finishing coat over vertical
- surfaces within 7 days
- ROLLER
• For best results, use a Long Nap Felt Roller
CAUTION
- Do not apply below 10°C or above 45°C
- Do not apply if humidity > 90%
- Do not over-thin. Use thinned paint within 24 hours
- Shake, stir and strain paint before use
- In case of eye contact, wash with plenty of water, seek medical attention
- Tightly close the lid when not in use and store in a cool, dry place
